Overview of High Strength Polyacrylonitrile Concrete Fiber 19mm PAN Fiber

For high-impact resistance, we offer Steel Fibers, an ideal replacement for welded wire mesh in industrial floors and pre-cast elements. We also provide specialized Structural Synthetic Fibers that offer high tensile strength for demanding applications. These fibers are uniformly dispersed throughout the concrete mix, creating a multi-dimensional reinforcement network that traditional methods cannot achieve. This integrated approach simplifies construction, accelerates placement, and enhances the overall integrity and longevity of the concrete, providing a modern answer to age-old cracking and durability challenges.

Features of High Strength Polyacrylonitrile Concrete Fiber 19mm PAN Fiber

1. Superior Crack Control and Enhanced Durability:

The primary feature of our fibers is their ability to bridge both micro-cracks that form during the plastic state and larger cracks in hardened concrete. This three-dimensional dispersion creates a more cohesive matrix that resists crack propagation. The direct benefit is a significant reduction in both plastic shrinkage cracking and long-term crack width. This leads to a much more durable concrete with lower permeability, which in turn enhances resistance to water ingress, freeze-thaw damage, and corrosion of any embedded steel. The result is a structure with a longer service life and reduced maintenance costs.

2. Increased Impact and Abrasion Resistance:

Fibers, particularly steel and robust synthetic macro fibers, dramatically improve the concrete’s toughness and post-crack performance. They absorb and distribute energy upon impact or loading. This feature provides the benefit of a more resilient surface that is less prone to spalling, chipping, and abrasion under heavy traffic or mechanical wear. This is a critical advantage for industrial floors, warehouse pavements, and infrastructure projects, leading to a harder-wearing surface that maintains its integrity over time.

3. Construction Efficiency and Cost Savings:

A key feature of using fiber reinforcement is the elimination of welded wire mesh (WWF) in many applications. This provides immense on-site benefits: it simplifies placement, as there is no mesh to be set up or potentially displaced, and it accelerates the entire construction process. By removing a labor-intensive step, projects see reduced labor costs and faster project timelines. The uniform distribution of fibers also ensures consistent reinforcement throughout the entire concrete section, unlike mesh, which can be improperly placed, leading to more reliable and predictable performance.

Specifications of High Strength Polyacrylonitrile Concrete Fiber 19mm PAN Fiber

This PAN fiber is for concrete reinforcement. It is made from polyacrylonitrile polymer. This product is extremely solid and long lasting. The fibers are 19 millimeters long. They are designed to mix conveniently right into concrete. This fiber enhances the concrete’s efficiency significantly.

PAN fibers are much more powerful than lots of other fibers. They have outstanding resistance to antacid. Concrete is very alkaline. This indicates frying pan fibers won’t damage down inside concrete. They last a long time. This stamina helps manage splitting. It also assists stop spalling. The fibers hold the concrete together securely. This happens even after cracks begin to form.

These fibers are extremely fine. They are likewise fairly rigid. They spread out well throughout the concrete mix. This creates a solid network inside the concrete. The network helps disperse tension loads. It improves the durability of the concrete. The concrete can deal with impacts much better. It also resists abrasion better.

You obtain these advantages without utilizing too much fiber. A regular dosage is 1 to 3 kilos per cubic meter of concrete. This is reliable. It makes the concrete stronger. The concrete likewise ends up being more resilient. The fibers function well with all typical concrete blends. They appropriate for numerous applications. These include commercial floors, sidewalks, precast elements, and shotcrete. The fibers improve the concrete’s general high quality. They give reputable efficiency.

Applications of High Strength Polyacrylonitrile Concrete Fiber 19mm PAN Fiber

High strength polyacrylonitrile concrete fiber, specifically the 19mm frying pan fiber, is actually useful for making concrete better. This fiber is really solid. It can handle hard conditions well. Its primary job is to quit splits from creating in concrete. It does this by holding the concrete with each other tightly. The 19mm length is good for managing fractures at an early stage. You mix it right into the concrete easily. It expands well. This fiber is likewise tough versus chemicals. Alkalis in concrete do not harm it a lot. This suggests it lasts a very long time. It will not rot or rust like a few other products. People utilize it a lot in industrial floorings. These floors get rush hour and loads. The fiber aids protect against surface area fractures and put on. It also works well for sidewalks and pieces. It manages contraction fracturing properly. This fiber is terrific for precast concrete things also. Think pipes, panels, and wall surfaces. It improves toughness and lowers breakage. The fiber likewise enhances effect resistance. This benefits locations where things might hit the concrete. Shotcrete applications profit a lot. The fiber helps the splashed concrete stick better. It minimizes rebound and stops fracturing. Making use of PAN fiber indicates much less plastic shrinking fracturing occurs. This takes place right after putting the concrete. The fiber bridges across small cracks as they develop. It aids maintain the concrete looking great and long-term much longer. Adding PAN fiber makes concrete frameworks a lot more dependable. It improves performance without requiring extra steel reinforcement. Builders discover it practical. We see it used usually for harder concrete jobs. The result is more powerful, more resilient concrete surface areas.

Company Profile

We are the global leader in lightweight concrete and advanced engineered foam solutions. Known globally for its commitment to research, innovation, and applied expertise, we have been providing engineered foam solutions since the early 2012’s.

We can supply high-quality concrete admixture and foam concrete related products all over the world.

The company has a professional technical department and quality supervision department, a well-equipped laboratory, and equipped with advanced testing equipment and after-sales customer service center.

If you are interested, please feel free and contact us.

Payment

T/T, Western Union, Paypal, Credit Card etc.

Shipment

By air, by sea, by express, as customers request.

5 FAQs of High Strength Polyacrylonitrile Concrete Fiber 19mm PAN Fiber

Here are 5 common questions about 19mm High Strength Polyacrylonitrile (PAN) Concrete Fiber.

What is PAN Concrete Fiber? It’s a synthetic fiber made from polyacrylonitrile. The 19mm length is common for concrete reinforcement. These fibers are added directly to the concrete mix.

What does PAN Fiber do in concrete? It mainly fights cracking. The fibers hold the concrete together as it dries. This reduces early-stage shrinkage cracks. PAN fibers also improve impact resistance. They help the concrete handle wear better.

How much PAN Fiber is needed per cubic meter? A typical dosage is between 1.0 and 2.0 kilograms per cubic meter of concrete. The exact amount depends on the project. Consider the concrete mix design and the required performance. Follow the supplier’s guidelines for best results.

Is PAN Fiber better than steel fiber? PAN fiber offers different benefits. It doesn’t rust like steel fibers. PAN fibers are lighter and mix more evenly throughout the concrete. They are very effective for controlling plastic shrinkage cracks. Steel fiber might be better for some heavy-duty structural uses.

Does PAN Fiber replace steel rebar? No, it does not replace structural steel reinforcement. PAN fiber is for secondary reinforcement. Its job is controlling cracks and improving durability. Steel rebar or mesh is still needed for structural strength in slabs, beams, and columns. PAN fiber works alongside the main steel.